Adhesive - Viking Butylclad Adhesive (SBA000)
Viking Butylclad adhesive is a neoprene-based rubber and resin contact adhesive - for Butylclad.
This product can also be used with CertainTeed.
Aquaknight Drain (SDM049)
Clever product that can be used with either an 80mm or 100mm downpipe. Includes stainless grate and overflow function.
Diverters (IMT601 Left) / (IMT602 Right)
IMT601 Left, IMT602 Right, Where roof meets wall cladding to prevent water entering behind cladding. To be used only with Butylclad and Epiclad.
Drains - Surefix Roof Outlets (IMT500 / IMT501 / IMT502)
IMT500 (Roof Outlet 80mm), IMT501 (Roof Outlet 100mm), IMT502 (Roof Outlet 150mm)
These high spec drainage outlets come with a leaf/gravel grate, flange, membrane clamping ring and anti-back-up flange rings on their pipes.
Fastening Bars - Drip Edges (SDF110)
A 20mm wide x 2400mm long aesthetic and practical solution (aluminium ribbed finish) is for securing any Viking single-ply membrane membrane over an edge whilst simultaneously providing a drip-edge.
Leaf Gravel Grate (IMT302)
This leaf/gravel grate is manufactured from tough, UV and ozone resistant PVC and will accommodate pipes from 60mm to 200mm.
Leaf Gravel Grate (IMT304)
This leaf/gravel grate is manufactured from tough, UV and ozone resistant PVC and can accommodate outlet diameters of 75mm to 125mm.
Leaf Gravel Grates (IMT303)
This leaf/gravel Grate is manufactured from tough, UV and ozone resistant PVC and will accommodate pipes from 60mm to 110mm.
Pipe Seals (SEM020)
Pre-moulded rubber pipe flashing with a self-adhesive base for detailing penetrations through rubber membranes.
Primer (Lap Seam) (SEC035)
Lap Seam Primer for priming the splicing area of the rubber membrane before applying lap tape. To be used with Butylclad and Epiclad.
Roof Drain (PVC) Overflow (SDM046 / SDM047 / SDM048)
PVC Drain Black overflow, available in 80mm, 100mm and 150mm. (SDM046 / SDM047 / SDM048)
Roof Drains (SDM032 / SDM033)
SDM032 (80mm) - SDM033 (100mm)
This drain-type has PVC flanges with clamp rings to mechanically secure the membrane and chrome flush grate -well suited to decks. These can be use with all Viking membranes including Bituclad torch-on.
Roof Drains (SDM036 / SDM037 / SDM038)
SDM036-(80mm), SDM037-(100mm), SDM38-(150mm).
This drain has PVC flanges with clamp rings to mechanically secure the membrane. The black domed plastic grate keeps debris out.
Roof Vent - (STP607)
Pressure release mechanism for ventilating roof cavity of or moisture vapours. Used for rubber membrane installations only. Not suitable for Dec-K-ing and Bituclad.
This scupper with fillet has been designed to make the detailing of rubber membranes through parapet walls easy. Opening 70mm x 100mm, to be use only with Butylclad and Epiclad.
Scupper (Rubco) (IMT104)
These scupper outlets have been designed to make the detailing of waterproofing membrane in through wall outlets easy. They have a built in fillet and an opening 200 x 75mm (E2 AS 1 compliant). This product is compatible with all membranes except Dec-K-ing and Enviroclad.
Scupper - Overflow (Rubco) (IMT105)
Conduit installed 150mm above surface as safety outlet for flooding. To be use with all Viking membrane except for Dec-K-ing and Enviroclad. Opening 200mm x 75mm
Sealant - Mastic (SES012)
Black mastic type sealant, specifically designed as a detailing weather sealant for rubber membrane installations.
Sumps (IMR100, IMR120 and IMR130)
IMR100 (75mm or 100mm), IMR120 (100mm or 150mm) and IMR130 (150mm or 200mm).
This Viking sump is a rotationally moulded, one piece sump with comes with an overflow spigot - all made from black weather resistant medium density polyethylene. Primarily designed for use in plywood formed box gutters the Skellerup sump can simplify detail work and make installation easy when used with Viking Butylclad or Epiclad.
Tape - Viking Flash Tape (SET153)
Viking self adhesive flash tape is a semi-cured detailing tape system used for flashing external detail areas. Only to be use with Butylclad and Epidclad membranes.
Tape - Viking Lap Tape (SMT076V)
Viking Lap Tape is a pressure-sensitive self adhesive tape system used to splice two sheets of rubber together. Only to be used with Butylclad and Epiclad.
Toluene cleaning agent for cleaning membrane materials. Only to be used for Butylclad and Epiclad. - Highly toxic - To be used with extreme caution.
Vent - Aluminium (IMV111 / IMV112)
Roof Vent Aluminium Grey/White Mushroom. Pressure release mechanism for ventilating roof or moisture vapour. These Vents can be used with all Viking membranes.
Viking Solvent (SES225)
Viking Solvent is a toluene-based liquid used to clean or prime substrates when mixed 50/50 with Butylclad Adhesive or Epiclad Adhesive.