Viking Roofspec

Before and After Tile Deck Before and After Timber Deck Tile Tabs Batten Holder

Skellerup Buzon (Screwjack Pedestal) Deck Support System

Screwjack pedestals suspend a floating, trafficable deck surface, in most cases, above a waterproofing membrane.

   

Why Screwjack Pedestals?

Indoor / Outdoor flow - With the New Zealand Building Code stating that an exterior deck’s waterproofing membrane must be a minimum of 100mm below the level of the interior floor slab, a screwjack pedestal system can suspend the deck’s walking surface at the same height as the interior floor level.

Superior drainage whilst still promoting watershed –  Water drains between the pavers or timber planks down onto the waterproofing membrane below.

Space Optimisation - Screwjack pedestals also hide unsightly services below an attractive deck surface

Access to membrane - Being able to remove a deck’s surface allows leaks to be diagnosed and the membrane to be easily cleaned.

Raised floors / platforms / stages - Temporary raised surfaces for exhibitions or shows can easily be erected and dismantled.

Acceptable Solution (External Moisture) - Screwjack pedestals are categorised as an "acceptable solution" according to E2/AS1.

Why Skellerup Buzon Screwjack Pedestals?

Height and Slope Adjustment - While most pedestals have only height adjustment, Skellerup Buzon pedestals have both height and slope adjustment allowing for the deck surface to be perfectly flat (0 degrees) while the membrane below slopes away to promote drainage.

Paver and Timber deck compatibility - Most pedestals have been designed only for pavers, whereas the Skellerup Buzon system also has a batten support system for accommodating timber deck bearers.

Load bearing - Each individual pedestal can support over one tonne of weight.

Surface area - Skellerup Buzon pedestals have the largest surface area of any pedestal on the market @ 325 cm² (20 cm diameter)

European Standards - Skellerup Buzon pedestals have been manufactured to precise European standards

Proven Performance - Since 1984, Skellerup Buzon pedestals have been supporting surfaces all over the world in some of high profile public places such as the Acropolis in Greece and Disney World in Florida to name a few.

Enquire about Buzon Screwjack Pedestals »

Accessories & Applications

Coupler

Coupler

Buzon Coupler, adds 120mm height.

IMB000 - Fixed height Pedestal

IMB000 - Fixed height Pedestal

17mm fixed height pedestal for supporting pavers or timber deck structures. The IMB000 can accommodate clip on slope correctors if required taking it to 27mm height.

IMB001 - Fixed Height Pedestal

IMB001 - Fixed Height Pedestal

28mm Fixed height pedestal for supporting pavers or timber deck structures. The IMB001 can accommodate clip on slope correctors if required taking it to 38mm height

IMB002 - Adjustable height Pedestal

IMB002 - Adjustable height Pedestal

Adjustable height pedestal for supporting pavers or timber deck structure. The IMB002 can accommodate clip on slope correctors if required, 45mm to 63mm Height range.

IMB003 - Adjustable height Pedestal

IMB003 - Adjustable height Pedestal

Adjustable height pedestal for supporting pavers or timber deck structures. The IMB003 can accommodate clip on slope correctors if required, 60mm to 88mm height range.

IMB004 - Adjustable Pedestal - Built in Slope Corrector

IMB004 - Adjustable Pedestal - Built in Slope Corrector

Adjustable Pedestal with build in slope corrector supporting pavers on timber deck structures, 74mm to 110mm height range.

IMB005 - Adjustable Pedestal - Built in Slope Corrector

IMB005 - Adjustable Pedestal - Built in Slope Corrector

Adjustable Pedestal with built in slope corrector supporting pavers on timber deck structure, 110mm to 170mm height range.

IMB010 - Clip-on Slope Corrector

IMB010 - Clip-on Slope Corrector

Clip-on slope corrector for IMB000 - IMB003 creates slope up to 5% (2.9°) if required.

IMB015 - Pedestals Tile Tabs

IMB015 - Pedestals Tile Tabs

Tile tabs with 4 x 4.5mm spacers for keeping pavers separate but equi-distant. Individual spacers can be snapped off if required.

IMB040 - Batten Holders

IMB040 - Batten Holders

The Batten holder plate is clipped onto the surface of the pedestal's supporting head using a raw plug. The batten-holder has a 65mm wide channel for accommodating joists into which screws can be fastened from the side. Longer raw plugs are used when slope correctors have been clipped onto the supporting head.

Rubber Equalisers

Rubber Equalisers

Rubber Equalisers to level pavers or pedestals. IMB020 (1mm) and IMB021 (2mm).

Detail Downloads

Buzon Pedestal (IMB000)

Formats presently available are:

Buzon Pedestal (IMB001)

Formats presently available are:

Buzon Pedestal (IMB002)

Formats presently available are:

Buzon Pedestal (IMB003)

Formats presently available are:

Buzon Pedestal (IMB004)

Formats presently available are:

Buzon Pedestal (IMB005)

Formats presently available are:

Adjustable pedestal Coupler

Formats presently available are:

Buzon DPH00.Fixed 19mm Timber Decking Wood Terraces

Formats presently available are:

Buzon DPH00.Fixed 29mm (with Slope Corrector 0 - 5%)

Formats presently available are:

Buzon DPH1.Fixed on 30mm Timber Decking Wood Terraces

Formats presently available are:

Buzon DPH1.Fixed 40mm (with Slope Corrector 0 - 5%)

Formats presently available are:

Buzon DPH2.Adjustable from 37-55mm Timber Decking Wood Terraces

Formats presently available are:

Buzon DPH2.Adjustable from 47-65mm (Slope Corrector 0 - 5%)

Formats presently available are:

Buzon DPH3.Adjustable from 52-80mm Timber Decking Wood Terraces

Formats presently available are:

Buzon DPH3.Adjustable from 62-90mm (Slope Corrector 0 - 5%)

Formats presently available are:

Buzon DPH4.Adjustable from 76-112mm (Slope Corrector 0 - 5%)

Formats presently available are:

Buzon DPH5.Adjustable from 102-172mm (Slope Corrector 0 - 5%)

Formats presently available are:

Buzon DPH5.Adjustable 102-172mm Batten Holder (Slope 0 - 5%)

Formats presently available are:

Buzon DPH6.Adjustable from 172-292mm (Slope Corrector 0 - 5%)

Formats presently available are:

Buzon DPH7.Adjustable from 202-242mm (Slope Corrector 0 - 5%)

Formats presently available are:

Buzon DPH8.Adjustable from 322-522mm (Slope Corrector 0 - 5%)

Formats presently available are:

Buzon DPH9.Adjustable from 392.622mm (Slope Corrector 0 - 5%)

Formats presently available are: