Skellerup Dec-K-ing (PVC) Waterproofing Membrane

All-in-one aesthetic, slip resistant waterproofing membrane for decks.

Skellerup’s DEC-K-ING PVC Membrane is a BRANZ appraised system which provides the ultimate underfoot finish and waterproofing to any deck.

Originally developed in the marine industry for boat platforms, this membrane's sheets are spliced using heat weldable technology for the ultimate in waterproofing integrity and its reinforced PVC mesh makes it possibly the most robust deck membrane on the market; especially from puncture and tear resistance perspectives.

A Skellerup Dec-K-ing membrane is a slip-resistant; attractive all-inclusive finished waterproofing solution ie: not requiring painting, nor tiles to be adhered over the top.

Dec-K-ing Colour Range

Dec-King comes in 5 stunning finishes and is ideally suited for use on roof decks, patios, pool decks, school playgrounds and commercial areas where durability and safety are a priority.

Colours available are:

Stonehenge Fawn

Granite Landau Grey

Pearl

Enquire about Dec-K-ing PVC Waterproofing Membrane »

masterspec reference - 4432S

Cleaning Kit

Deck cleaner, spot remover and brush in a convenient kit for keeping Dec-K-ing PVC clean.

Corner - Inside Flashing 90° (Decking)

Heat weldable 90° Inside corner flashings for Dec-K-ing installations. SDM077 (Sandy Granite), SDM072 (Sandy Landau Grey), SDM068 (Sandy Pearl), SDM070 (Stonehenge) and SDM074 (Fawn).

Corner - Outside Corner 90° (Decking)

Heat weldable 90° outside corners for Dec-K-ing available in 5 colours. SDM077 (Sandy Granite), SDM072 (Sandy Landau Grey), SDM068 (Sandy Pearl), SDM070 (Stonehenge) and SDM074 (Fawn).

Dec-K-ing Adhesive

Dec-K-ing contact adhesive 20L.

Dec-K-ing Floor Patch (SDF660)

Floor patch pails with leveling compound to a maximum 2mm thickness.

Dec-K-ing Transit Flashing

Dec-K-ing door transit flashings, SDM077 (Sandy Granite), SDM072 (Sandy Landau Grey), SDM068 (Sandy Pearl), SDM070 (Stonehenge), SDM074 (Fawn).

Fastening Bars - Drip Edges (SDF110)

A 20mm wide x 2400mm long aesthetic and practical solution (aluminium ribbed finish) is for securing any Skellerup single-ply membrane membrane over an edge whilst simultaneously providing a drip-edge.

Gorilla Grip Express (SDF700)

Gorilla Grip Express is used to seal plywood edges when preparing a plywood substrate for the installation of Dec-K-ing and Enviroclad.

Heat Gun (SDM140)

Heat gun - used for detail welding for PVC and TPO installations.

Lap Roller (SDM155)

For pressure rolling either rubber membrane laps, or behind the hot-air nozzle while welding.

Nozzle (SDM147)

Nozzle - 20mm wide slot @ 60° for heat gun.

Nozzle (SDM148)

Nozzle - 40mm wide slot @ 60° for heat gun.

Nozzle (SDM149)

Nozzle 40mm Standard

Nozzle (SDM151)

Nozzle 20mm 90 degree

Nozzle 20 mm Standard (SDM145)

Nozzle - 20mm wide slot for heat gun

PVC Coated Outlet

Overflow outlet with PVC coated surface for welding the membrane to.

Roller (SDM175)

Dec-K-ing Roller cage. (SDM175)

Roller Sleeve (SDM176)

Dec-K-ing Roller Sleeve.

Roof Drain (PVC) Overflow (SDM046 / SDM047)

PVC Drain Black overflow, available in 80mm and 100mm. (SDM046 / SDM047)

Roof Drains (SDM032 / SDM033)

SDM032 (80mm), SDM033 (100mm) This drain-type has PVC flanges with clamp rings to mechanically secure the membrane and chrome flush grate -well suited to decks. These can be use with all Skellerup membranes including Bituclad torch-on.

Roof Drains (SDM036 / SDM037)

SDM036 (80mm, SDM037 (100mm) - This drain has PVC flanges with clamp rings to mechanically secure the membrane. The black domed plastic grate keeps debris out.