Adhesive - Sure-Weld Bonding Adhesive (STP000)
Contact bonding adhesive for bonding Enviroclad to the substrate.
Battery Powered Caulking Gun (STP910)
Battery powered caulking gun for dispensing FAST ADHESIVE for adhering FBS membranes or polyiso panels to the substrate.
Brass Convex Roller (SDM156)
Brass Convex Roller
Brass Pressure Roller (SDM153)
Lap Brass Pressure Roller.
Corner - Enviroclad Inside (STP300 / STP310)
STP300 (White), STP310 (Grey). Enviroclad Weldable TPO inside corner flashing (Round)
Corner - Enviroclad Outside (STP200 / STP210)
STP200 (White), STP210 (Grey) Enviroclad Weldable TPO outside corner flashing (Fluted).
Corner -Enviroclad 90° Extermal (STP311)
Enviroclad Grey TPO Weldable external corner flashing (for 90 degree junctions)
Corner- Enviroclad 90° Internal (STP211)
Enviroclad Grey TPO internal corner flashings for 90 degree junctions.
Drains - Enviroclad Dropper Drains (STP605 / STP606)
STP605 (80mm), STP606 (100mm). Enviroclad Dropper Drains with anti back-up rings. The flanges can be welded onto.
Enviroclad Non-Reinforced TPO Flashing
STP600 (300mm White), STP610 (300mm Grey). Heat weldable non-reinforced TPO material used for flashing detail areas of Envoriclad Projects.
Enviroclad Pourable Pockets (STP440 / STP450)
STP440 (White), STP450 (Grey). Enviroclad pourable pockets that weld onto the membrane creating a surround which encapsulates the roof penetrations and accommodates a sealant that gets poured onto it - thus sealing the penetrations.
Enviroclad Pourable Sealer (STP460)
Enviroclad pourable Sealer which gets poured into the pocket surround thus sealing the penetrations which are to be a minimum of 25mm apart and from edges.
Enviroclad Russ (STP701)
Enviroclad Russ is a flashing product with both a self adhesive strip and TPO Strip for securing membranes at the base of parapets to the field sheet.
Enviroclad Seam Probe (STP880)
Seam Probe-instrument; the pointed end of which tests the welding integrity of laps.
Enviroclad Splice Wipes (STP480)
Enviroclad Splice Wipes for cleaning laps. (1000 per box)
Enviroclad Split Pipe Boot (STP800 / STP820)
STP800 (White), STP820 (Grey). Enviroclad Split pipe boot for flashing around existing pipes.
Enviroclad T-Joint Corner (STP400 / STP410)
Enviroclad Grey / White TPO Weldable t-joint corner flashing.
Enviroclad TPO Coated Metal (STP850 / STP851)
STP850 (White), STP851 (Grey). Enviroclad TPO coated metal (0.55galv) can be cut and folded, made into flashings that can be welded onto.
Enviroclad weathered membrane cleaner (STP001)
Weathered membrane cleaner is for cleaning Enviroclad membrane - especially for lap preparations and for areas where welding new membrane to existing.
Fastening Bars - Drip Edges (SDF110)
A 20mm wide x 2400mm long aesthetic and practical solution (aluminium ribbed finish) is for securing any Viking single-ply membrane membrane over an edge whilst simultaneously providing a drip-edge.
Heat Gun (SDM140)
Heat gun - used for detail welding for PVC and Enviroclad TPO installations.
Lap Roller (SDM155)
For pressure rolling either rubber membrane laps, or behind the hot-air nozzle while welding.
Nozzle - 20mm wide slot @ 60° for heat gun.
Nozzle - 40mm wide slot @ 60° for heat gun.
Nozzle 40mm Standard
Nozzle 20mm 90 degree
Nozzle 20 mm Standard (SDM145)
Nozzle - 20mm wide slot for heat gun
Pipe Seals- Enviroclad (STP420 / STP430)
STP420 (White), STP430 (Grey). Weldable Enviroclad Pipe Seals used for flashing new pipe penetrations with diameters ranging from 25mm to 150mm
Planon Rotot Welder - (SDM152)
Planon Robot Welder - used for detail welding for PVC and Enviroclad TPO installations
Pneumatic Caulking Gun (STP915)
Pneumatic powered caulking gun for dispensing FAST ADHESIVE for adhering FBS membranes or polyiso panels to the substrate.
Roof Drains (SDM036 / SDM037 / SDM038)
SDM036-(80mm), SDM037-(100mm), SDM38-(150mm).
This drain has PVC flanges with clamp rings to mechanically secure the membrane. The black domed plastic grate keeps debris out.
Scuppers- Enviroclad (STP601 / STP602)
STP601 (100 x 65mm), STP602 (100 x 100mm). Scuppers onto which Enviroclad membrane can be welded.
Sealant - Clear Cut Sealant (STP012)
Clear cut-edge sealant used for sealing the fibre of the cut edges of reinforced Enviroclad membrane.
Sealant -Water Cut off Mastic (STP870)
A non-UV resistant sealant for use between EPDM or Enviroclad TPO membranes and mechanical fastenings.(especially vertically fixed)
Sealant- PT304 (STP860)
Sealant - U.V Resistant Sealant for chase flashings. To be used with Enviroclad.
Standard Roofing Kit: Type 2 (SDM141)
1x Techspan Plastic Welding Tool
1x Wide Slot Nozzle 20mm
1x Wide Slot Nozzle 40mm
1x Pressure Roller 28mm
1x Brass Pressure Roller
Tarpon Robot Welder - (SDM142)
Tarpon Robot Welder - used for detail welding for PVC and Enviroclad TPO installations
Vent - Aluminium (IMV111 / IMV112)
Roof Vent Aluminium Grey/White Mushroom. Pressure release mechanism for ventilating roof or moisture vapour. These Vents can be used with all Viking membranes.
Vent - Two Way Air Vent (STP607)
2 Way air vent to ventilating roof cavity. This can be welded onto.
Walkway - Enviroclad Weldable Rolls (STP700)
Heat Weldable Walkway rolls with non slip surface. To be use only on Enviroclad.