Viking Roofspec

Viking Epiclad F.B.S. (EPDM fleece-backed) rubber waterproofing membrane

For low-slope roof overlays and/or applying to rough substrates.

                                                                  

 

Complies with E2/AS1 as an Acceptable Solution

Viking Epiclad FBS (Fleece-Backed System) is BRANZ Appraised and complies with E2/AS1 as an "Acceptable Solution".

Viking Epiclad FBS membrane is manufactured for waterproofing rough surfaces, or retrofitting over bitumen, mathoid, concrete or tongue & groove sarking.

Viking Epiclad FBS is made from the same EPDM rubber polymer as Viking Epiclad but also incorporates a polyester fibre matt fleece-backing which promotes the bond with the substrate; vents excessive moisture and adhesive vapours; and provides extra cushioning against puncture and tearing. It is available in 2.50mm thick (including fleece), 3m x 15.2m seamless sheets to provide minimum joining on large areas.

Enquire about Epiclad F.B.S Fleece Backed Waterproofing Membrane ยป

masterspec reference - 4422SR

Masterspec

Accessories & Applications

Adhesive -  FBS Fast Dual Cartridge (STP900)

Adhesive - FBS Fast Dual Cartridge (STP900)

2 Part polyurethane foam adhesive (applied by a Caulking gun) for adhering fleece-backed membranes and polyiso insulation panels to the substrate.

Battery Powered Caulking Gun (STP910)

Battery Powered Caulking Gun (STP910)

Battery powered caulking gun for dispensing FAST ADHESIVE for adhering FBS membranes or polyiso panels to the substrate.

Diverters (IMT601 Left) / (IMT602 Right)

Diverters (IMT601 Left) / (IMT602 Right)

IMT601 Left, IMT602 Right, Where roof meets wall cladding to prevent water entering behind cladding. To be used only with Butylclad and Epiclad.

Drains - Surefix Roof Outlets (IMT500 / IMT501 / IMT502)

Drains - Surefix Roof Outlets (IMT500 / IMT501 / IMT502)

IMT500 (Roof Outlet 80mm), IMT501 (Roof Outlet 100mm), IMT502 (Roof Outlet 150mm) These high spec drainage outlets come with a leaf/gravel grate, flange, membrane clamping ring and anti-back-up flange rings on their pipes.

Fastening Bars - Drip Edges (SDF110)

Fastening Bars - Drip Edges (SDF110)

A 20mm wide x 2400mm long aesthetic and practical solution (aluminium ribbed finish) is for securing any Viking single-ply membrane membrane over an edge whilst simultaneously providing a drip-edge.

Leaf Gravel Grate (IMT302)

Leaf Gravel Grate (IMT302)

This leaf/gravel grate is manufactured from tough, UV and ozone resistant PVC and will accommodate pipes from 60mm to 200mm.

Leaf Gravel Grate (IMT304)

Leaf Gravel Grate (IMT304)

This leaf/gravel grate is manufactured from tough, UV and ozone resistant PVC and can accommodate outlet diameters of 75mm to 125mm.

Leaf Gravel Grates (IMT303)

Leaf Gravel Grates (IMT303)

This leaf/gravel Grate is manufactured from tough, UV and ozone resistant PVC and will accommodate pipes from 60mm to 110mm.

Pneumatic Caulking Gun (STP915)

Pneumatic Caulking Gun (STP915)

Pneumatic powered caulking gun for dispensing FAST ADHESIVE for adhering FBS membranes or polyiso panels to the substrate.

Primer (Lap Seam) (SEC035)

Primer (Lap Seam) (SEC035)

Lap Seam Primer for priming the splicing area of the rubber membrane before applying lap tape. To be used with Butylclad and Epiclad.

Roof Drains (SDM032 / SDM033)

Roof Drains (SDM032 / SDM033)

SDM032 (80mm) - SDM033 (100mm) This drain-type has PVC flanges with clamp rings to mechanically secure the membrane and chrome flush grate -well suited to decks. These can be use with all Viking membranes including Bituclad torch-on.

Roof Drains (SDM036 / SDM037 / SDM038)

Roof Drains (SDM036 / SDM037 / SDM038)

SDM036-(80mm), SDM037-(100mm), SDM38-(150mm). This drain has PVC flanges with clamp rings to mechanically secure the membrane. The black domed plastic grate keeps debris out.

Roof Vent - (STP607)

Roof Vent - (STP607)

Pressure release mechanism for ventilating roof cavity of or moisture vapours. Used for rubber membrane installations only. Not suitable for Dec-K-ing and Bituclad.

Scupper (IMT106)

Scupper (IMT106)

This scupper with fillet has been designed to make the detailing of rubber membranes through parapet walls easy. Opening 70mm x 100mm, to be use only with Butylclad and Epiclad.

Scupper (Rubco) (IMT104)

Scupper (Rubco) (IMT104)

These scupper outlets have been designed to make the detailing of waterproofing membrane in through wall outlets easy. They have a built in fillet and an opening 200 x 75mm (E2 AS 1 compliant). This product is compatible with all membranes except Dec-K-ing and Enviroclad.

Scupper - Overflow (Rubco) (IMT105)

Scupper - Overflow (Rubco) (IMT105)

Conduit installed 150mm above surface as safety outlet for flooding. To be use with all Viking membrane except for Dec-K-ing and Enviroclad. Opening 200mm x 75mm

Sealant - Mastic (SES012)

Sealant - Mastic (SES012)

Black mastic type sealant, specifically designed as a detailing weather sealant for rubber membrane installations.

Sumps (IMR100, IMR120 and IMR130)

Sumps (IMR100, IMR120 and IMR130)

IMR100 (75mm or 100mm), IMR120 (100mm or 150mm) and IMR130 (150mm or 200mm). This Viking sump is a rotationally moulded, one piece sump with comes with an overflow spigot - all made from black weather resistant medium density polyethylene. Primarily designed for use in plywood formed box gutters the Skellerup sump can simplify detail work and make installation easy when used with Viking Butylclad or Epiclad.

Tape - Semi Cured Overlay Tape (SET141)

Tape - Semi Cured Overlay Tape (SET141)

Semi-cured detail tape specifically used to waterproof the end seams between Viking Epiclad FBS sheets to prevent water migration up the fleece.

Tape - Viking Flash Tape (SET153)

Tape - Viking Flash Tape (SET153)

Viking self adhesive flash tape is a semi-cured detailing tape system used for flashing external detail areas. Only to be use with Butylclad and Epidclad membranes.

Toluene (MCD030)

Toluene (MCD030)

Toluene cleaning agent for cleaning membrane materials. Only to be used for Butylclad and Epiclad. - Highly toxic - To be used with extreme caution.

Vent - Aluminium (IMV111 /  IMV112)

Vent - Aluminium (IMV111 / IMV112)

Roof Vent Aluminium Grey/White Mushroom. Pressure release mechanism for ventilating roof or moisture vapour. These Vents can be used with all Viking membranes.

Detail Downloads

Parapet Wall Transition
Parapet Wall Transition

Formats presently available are:

Sumps
Sumps

Formats presently available are:

Skylight Upstand
Skylight Upstand

Formats presently available are:

Scupper Outlet
Scupper Outlet

Formats presently available are:

Pipe Penetration
Pipe Penetration

Formats presently available are:

Eaves Gutter
Eaves Gutter

Formats presently available are:

Internal Gutter
Internal Gutter

Formats presently available are:

Chase Flashing on Upstand
Chase Flashing on Upstand

Formats presently available are:

Internal Gutter for Metal Roof
Internal Gutter for Metal Roof

Formats presently available are:

Dropper and Roof Drain Outlet
Dropper and Roof Drain Outlet

Formats presently available are:

Cavity Wall Upstand
Cavity Wall Upstand

Formats presently available are:

Exposed Wall Transition
Exposed Wall Transition

Formats presently available are:

Roof Fixing
Roof Fixing

Formats presently available are:

Aluminium Vent and Pipe Penetration
Aluminium Vent and Pipe Penetration

Formats presently available are:

Edge Detail for Cavity Wall
Edge Detail for Cavity Wall

Formats presently available are:

Overflow Outlet
Overflow Outlet

Formats presently available are:

Parapet Overflow
Parapet Overflow

Formats presently available are:

Sumps Installation
Sumps Installation

Formats presently available are:

Ebook Catalogue

Google+