Viking Enviroclad

Viking Enviroclad offers absolute watertight integrity for low slope roofs. It is a TPO (thermoplastic polyolefin) waterproofing membrane which possesses all the necessary attributes of a world-class system from waterproofing, aesthetic and environmental perspectives.

We offer 3 Viking Enviroclad solutions - Enviroclad, Enviroclad FBS and Enviroclad APEEL. Check out the products below.

Enviroclad - Waterproofing Membrane

Proven Performance

Viking Enviroclad has been a proven performer. It has been tried and tested both internationally and locally, having been installed on over 3,000 buildings and homes across New Zealand.

In fact it has been installed on the likes of Fonterra, Courier Post and the Ministry of Justice buildings to name a few.

It can be installed as a system for low slope roofs, gutters and pond-liners.

CodeMark NZ Certified

CodeMark is the highest level of product certification available for a building material. It demonstrates that the product meets the highest levels of quality assurance and it guarantees compliance with the Building Code when specified within the parameters of the CodeMark Certification.

At Viking Roofspec our low-slope waterproofing membranes, Viking Enviroclad and Viking Bituclad have CodeMark Certification, providing the simplest pathway to compliance.

Read more about CodeMark products on the MBIE website.

Read More

Proprietary Weldable Accessories

Viking Enviroclad is a roof 'system'. It is not complete without its proprietary weldable accessories. Does your roof have an air conditioning unit, tricky corners or pipes? Sometimes these are a challenge as you need to create a watertight finish surrounding roof penetrations or in corners.

Viking Enviroclad accessories, which range from weldable internal and external corners to pourable pockets, will create a watertight finish, forming a vital part of our Viking Enviroclad 'system'.

Specification made easy

We have an extensive range of Specification documents, CAD details, Product Technical Statement, CodeMark and BRANZ certificates available for Viking Enviroclad.

To access these goodies and more click on the link below.

Read More

Where can it be installed?

Viking Enviroclad can be installed as a system for low slope roofs, gutters and pond-liners.

To ensure a professional, watertight finish Enviroclad can only be installed by a Viking Approved Applicator.

Unrivalled features

  • Reduced seams - with wider and longer rolls, there are less seams on the finished roof

  • Strong seams - the seams are heat welded to create a vulcanised, watertight finish

  • High puncture resistance - helps protects the building

  • Elongation - forgives building movement

  • UV resistance - withstands New Zealand’s harsh sunshine

  • High solar reflectivity - Viking Enviroclad comes in grey and white. Both offer high solar reflectivity which can result in energy savings. In fact, the white Enviroclad offers 92% solar reflectivity which will reduce the load on your air conditioning units!

  • Aesthetic finish - it looks like it has been poured on. This was a very important factor in selecting Enviroclad for some Auckland Apartment owners, as a number of occupants could see the roof from their windows.

Mechanical Fastening with RhinoBond

In line with the construction industry’s continuous evolution, there are a growing number of substrate options onto which membranes are installed. A common question is whether Enviroclad can be laid over substrates other than plywood, concrete or rigid insulation. The main issue is adhesion. With the RhinoBond method of fixing, you can be certain that the strongest possible adhesion will be achieved.

RhinoBond is an induction fastening technology, which is an alternative method of mechanically-fastening Enviroclad membrane to a wide range of substrates. The difference from other types of mechanical fastening is that it doesn’t involve penetrating the membrane.

Quality Assurance

We stand behind our product and Viking Enviroclad products are covered by a robust 20 year Product Warranty.

It is also eligible to be a part of a Viking Full System Warranty, which includes both installation and product, covered in one process.

Read More

Ease of Approvals

Viking Enviroclad and Enviroclad APeel are BRANZ appraised.

What does this mean?

Well, it has been independently tested in New Zealand, by BRANZ, to ensure it can handle New Zealand's harsh conditions and complies with the New Zealand Building Code.

Water Potability

The Enviroclad products meets the AS/NZS 4020 testing of products for use in contact with drinking water standard. Enviroclad complies with the New Zealand Building Code's (G12) potability clause.

Enviroclad FBS - Fleeceback Membrane

The ultimate re-roofing solution

Viking Enviroclad FBS is one of the best re-roofing solutions to install over old bitumen or rough substrates such as concrete and tongue and groove, to create a watertight roof finish.

It features all the benefit of Viking Enviroclad which are above.................but it offers afew more!

What is Viking Enviroclad FBS?

It is a fleece-backed roofing membrane that consists of the following materials:

  • 1.4 mm layer polyester fleece-backing
  • 1.14mm of Enviroclad TPO roofing membrane

The polyester fleece-backing is factory laminated to the Viking Enviroclad waterproofing roofing membrane. When installed the fleece-back bonds with the substrate, transforming an ugly roof surface into an aesthetically gratifying roof.

High impact and UV resistant

The reinforced thermoplastic with the added fleece renders a 33% greater puncture resistance than most high puncture resistant membranes.

The Enviroclad FBS membrane, in grey or white, offers solar reflectivity and is able to withstand New Zealands harsh sunshine conditions.

Hassle free re-roofing solution

Overlaying over an existing substrate negates any costs associated with stripping the current roofing surface; no costly reconstruction or reconditioning of the existing roof and no redesigning costs, as the new roof loading is limited.

Overlaying also avoids the hassle of exposing the interior of the building to the changing weather conditions as the roof is replaced.

Reduction in waste

As the Viking Enviroclad FBS re-roofing solution is overlaid over the existing roof's surface, there is no need to dump the old roof - thus reducing wastage costs and avoiding filling the local land-fill with inorganic waste.

Specification made easy

We have an extensive range of Specification documents, CAD details, Product Technical Statement and Brochures available for Viking Enviroclad FBS.

To access these goodies and more click on the link below.

Read More

Enviroclad APEEL - Protective Layer

What is Viking Enviroclad APEEL?

Viking Enviroclad APEEL is normal Enviroclad, coated with a durable protective film that is applied to the surface of the membrane at the time of manufacture.

Durable and easy to remove, APEEL protective film helps save time, labour and improves aesthetics as well as long-term reflectivity (which increases energy efficiency and helps to reduce cooling costs).

Viking Enviroclad APEEL is available in both 1.14mm and 1.52mm thicknesses; 3.05m wide and in grey in colour (white is available on indent).

Where can it be installed?

Viking Enviroclad APEEL is ideal for re-roofing and new construction projects. It can be installed as a system for low slope roofs and gutters.

To ensure a professional, watertight finish Viking Enviroclad APEEL can only be installed by a Viking Approved Applicator.

Post Construction

Viking Enviroclad APEEL protective film will stay in place until it is ready to be taken off, at which time the strips are easily removed by a single person. Ideal adhesion levels allow the film to stay in place for months, resisting the effects of heat, UV exposure, rain and wind.

Once the film is removed, no residue remains on the membrane, providing the building owner with a clean, white, reflective roof that will continue to resist dirt pick-up long after installation.

Time and Labour Savings

It is becoming common practice for building owners to request that their new membrane roof be cleaned before they pay for it.

But with Viking Enviroclad APEEL, there is no need to clean or power wash the roof after installation; simply remove the film, and the roof is ready for final inspection.

Specification made easy

We have an extensive range of Specification documents, CAD details, Product Technical Statement, CodeMark and BRANZ certificates available for Viking Enviroclad.

To access these goodies and more click on the link below.

Read More

Thanks for contacting us. We will be in contact soon to discuss your project. Rest assured that in working with Viking Roofspec we will assist you in choosing the right roofing or waterproofing solution to protect your (or your customer's) most important assets.

In the meantime feel free to call us on 0800 729 799.

Kind regards

The Team at Viking Roofspec

Make an Enquiry

Thanks for contacting us. We will be in contact soon to discuss setting up a presentation with you. Rest assured that in working with Viking Roofspec we will assist you in choosing the right roofing or waterproofing solution to protect your (or your customer's) most important assets.

In the meantime feel free to call us on 0800 729 799.

Kind regards

The Team at Viking Roofspec

Book a presentation

Thanks for contacting us. We will be in contact soon to discuss your project. Rest assured that in working with Viking Roofspec we will assist you in choosing the right roofing or waterproofing solution to protect your (or your customer's) most important assets.

In the meantime feel free to call us on 0800 729 799.

Kind regards

The Team at Viking Roofspec

{{CC.title}}

Related Products

Accessories

Outside Corner Fluted

Comes in white or grey (STP200 & STP210).

Outside Corner Fluted

Pourable Sealant

Pourable sealant which gets poured into the pocket surround thus sealing the penetrations (2L) (STP460).

Pourable Sealant

Non-Reinforced TPO Flashing

Heat-weldable non-reinforced TPO material used for flashing detail areas (300mm x 15.2m, white or grey) (STP600 & STP610).

Non-Reinforced TPO Flashing

Vent

Aluminium mushroom, grey or white (IMV111 & IMV112).

Vent

Fastening Bars/Drip Edges

25mm wide x 2400mm long with an aluminium-ribbed finish for securing any Viking single-ply membrane membrane over an edge whilst simultaneously providing a drip-edge (grey or beige) (SDF110 & SDF115).

Fastening Bars/Drip Edges

Clear Cut Edge Sealant

Clear cut-edge sealant used for sealing the fibre of the cut edges of reinforced Enviroclad membrane (300ml) (STP012A).

Clear Cut Edge Sealant

Silicone Pressure Roller

For pressure rolling either rubber membrane laps, or behind the hot-air nozzle while welding (SDM155).

Silicone Pressure Roller

Inside Corner

Comes in grey or white (STP300 & STP310).

Inside Corner

Pipe Seal (1)

Weldable pipe seals for flashing new pipe penetrations with diameters ranging from 25mm to 150mm (white, grey) (STP420 & STP430).

Pipe Seal (1)

Pourable Pocket

Pourable pockets weld onto the membrane creating a surround which encapsulates roof penetrations and accommodates a sealant that gets poured into it - thus sealing the penetrations (white, grey) (STP440 & STP450).

Pourable Pocket

Weldable Walkway Roll

Heat-weldable walkway rolls with non-slip surface (762mm x 15.2m, white and grey) (STP700 & STP710).

Weldable Walkway Roll

Scupper (3)

100mm x 65mm, 100mm x 100mm (STP601 & STP602).

Scupper (3)

Dropper Drain

Dropper drains with anti back-up rings; the flanges can be welded onto (80mm, 100mm) (STP605 & STP606).

Dropper Drain

Two Way Air Vent

2 Way air vent to ventilating roof cavity. This can be welded onto (STP607).

Two Way Air Vent

TPO Coated Metal

Can be cut and folded, made into flashings that can be welded onto (0.55galv, 1.2m x 3m, white and grey) (STP850 & STP851).

TPO Coated Metal

PT304 Sealant

For chase flashings (300ml) (STP860).

PT304 Sealant

Seam Probe

Instrument which tests the welding integrity of laps (STP880).

Seam Probe

Hand-welding Tool

Heat gun - used for detail welding for PVC and Enviroclad TPO installations (SDM140).

Hand-welding Tool

Standard Hand-weld Kit: Type 2

1x Techspan Plastic Welding Tool, 1x Wide Slot Nozzle 20mm, 1x Wide Slot Nozzle 40mm, 1x Pressure Roller 28mm, 1x Brass Pressure Roller (SDM141).

Standard Hand-weld Kit: Type 2

Enviroclad Adhesive

Contact bonding adhesive for bonding Enviroclad to the substrate (19L) (STP000).

Enviroclad Adhesive

Splice Wipes

For cleaning laps (1000 per box) (STP480).

Splice Wipes

Water Cut-off Mastic

For use between EPDM or Enviroclad TPO membranes and mechanical fastenings, especially vertically-fixed (310ml) (STP870).

Water Cut-off Mastic

T-Joint Corner

Comes in grey or white (STP400 & STP410).

T-Joint Corner

Pneumatic Caulking Gun

For dispensing FAST ADHESIVE for adhering FBS membranes or polyiso panels to the substrate (STP915).

Pneumatic Caulking Gun

Planon Robot Welder

Used for detail welding for PVC and Enviroclad TPO installations (SDM152).

Planon Robot Welder

Tarpon Robot Welder

Used for detail welding for PVC and Enviroclad TPO installations (SDM142).

Tarpon Robot Welder

Brass Pressure Roller

For rolling laps (SDM153).

Brass Pressure Roller

Aquaknight Drain

Clever product that can be used with either an 80mm or 100mm downpipe. Includes stainless grate and overflow function (SDM049).

Aquaknight Drain

Scupper (4)

200mm x 75mm scupper onto which Enviroclad membrane can be welded (STP603).

Scupper (4)

Viking Protection Sheet

Polypropylene protection sheet is laid over a new membrane roof or deck installation to protect the membrane throughout construction. It is held in place with a polyethylene tape (3m-wide, cut-to-length) (SRG003A & SPT001).

Viking Protection Sheet

Membrane Cleaner

For cleaning Enviroclad membrane - especially for lap preparations and for areas where welding new membrane to existing (19L) (STP001).

Membrane Cleaner

Multi Drain/Overflow

150mm diameter pipe (SDM051).

Multi Drain/Overflow

Drain/Grill

80mm/100mm diameter pipes (SDM050).

Drain/Grill

Multi Drain/Overflow Side Exit

50mm diameter pipes (SDM053).

Multi Drain/Overflow Side Exit

Drain/Grill Side Exit

50mm diameter pipe (SDM054).

Drain/Grill Side Exit

Short Vent

Aluminium mushroom (black) (IMV113).

Short Vent

Standard Hand-weld Kit: Type 1

1 x Techspan Plastic Welding Tool, 1 x wide-slot nozzle (40mm), 1 x pressure roller (40mm) (SDM143).

Standard Hand-weld Kit: Type 1

Seam Plate & Fastener

Range of ply and concrete fasteners (50mm, 76mm, 100mm) (VWR001).

Seam Plate & Fastener

Drylight Aluminium Frame

1.22m x 1.22m, 0.94m x 0.94m, 1.07m x 1.07m (SDR100).

Drylight Aluminium Frame

Drylight Flashing

White, 1.22m x 1.22m, 0.94m x 0.94m, 1.07m x 1.07m (SDR200).

Drylight Flashing

Flexible F.A.S.T. Adhesive

Two-part polyurethane foam adhesive (applied by caulking gun) for adhering fleece-backed membranes and polyiso insulation panels to the substrate (STP900B).

Flexible F.A.S.T. Adhesive

Heavy Roller (Rubber)

(SDM154).

TPO Coated Drip Edge

3.0m, white or grey (STP881 & STP882).

TPO Coated Drip Edge

Overflow (1)

200mm x 80mm (STP604).

Overflow (1)