Enviroclad TPO

Lansdowne Ave-12.jpg

Viking Enviroclad is a BRANZ appraised and CodeMark Certified world-class TPO (thermoplastic polyolefin) waterproofing membrane.

Having been tried and tested both internationally and locally, Viking Enviroclad offers absolute watertight integrity for low-slope and pitched roofs, gutters, parapets, pond liners, balconies, under floating decks and roof gardens of commercial and residential buildings.

Viking Enviroclad membrane is 100% recyclable, supplied cut-to-length if requested, meaning minimal waste while also negating the use of oil-based splicing systems - due to it's heat weldability.

The benefit for building owners is Viking Enviroclad's proven performance in New Zealand conditions, having been installed on thousands of buildings and homes across New Zealand and the Pacific Islands since 2007.

Hobsinville.jpg

Manufactured by the world's largest and most technologically advanced manufacturer of waterproofing membranes, Carlisle Construction Materials, Viking Enviroclad is not just a membrane, it is a ‘system’. It is not complete without its compatible adhesives, sealants and proprietary weldable accessories.

Viking Enviroclad’s heat-weldable accessories have been developed to ensure water tightness in these vulnerable areas. These accessories range from heat-weldable internal and external corner flashings, to self-sealing pourable pockets to create a watertight finish around penetrations.

Product Benefits

  • Six colour options: Grey, White, Mansard Brown, Patina Green, Rock Brown and Slate Grey

  • Thousands of installations in NZ and the Pacific Islands

  • New Zealand's preferred single-ply membrane

  • Installed only by Viking Licensed Applicators

  • Formulated to suit a wide range of climatic conditions

  • UV resistant

  • Water potability certified

  • Heat-reflectivity

  • Heat-weldable

  • Custom-made accessories

  • Wide rolls – (up to 3.66m) = less seams

  • Long rolls – (30.4m) = less seams

  • 20-year product warranty

  • CodeMark Certified (Certificate No. 30058)

  • BRANZ Appraised (Appraisal No. 656)

raynor-3.jpg

Viking also offers three additional Viking Enviroclad solutions: Enviroclad APEEL; Enviroclad FBS and RhinoBond Mechanical Fastening:

APEEL.JPG

Enviroclad APEEL

An Enviroclad membrane with a protective film that has been factory-applied to the surface of the membrane. Viking Enviroclad APEEL's protective film temporarily guards the surface of the membrane from scuffs and dirt accumulation during installation (and construction process), until it gets peeled off by the roofing applicator; leaving a pristine, shiny roof surface - having eliminated the laborious process of wiping the surface area with solvents.

4.jpg

Enviroclad FBS

An Enviroclad membrane where a 'fluffy' polyester layer that has been factory-laminated to the underside.

Enviroclad FBS is one of the best reroofing solutions for overlaying over old bitumen and other types of old membranes. It's also a good option for forgiving uneven substrates such as rough concrete.

RhinoBond Mechanical Fastening

RhinoBond is an induction-fastening technology that provides an alternative method of bonding the Viking Enviroclad membrane to a wide range of substrates; eliminating the need for adhesive.

It's mechanical fastening method, surprisingly does not involve penetrating the membrane.

A specialised induction machine emits an electromagnetic charge down through the membrane surface, that welds the underside of the Enviroclad to the top of specialised TPO coated washers (plates) which are screwed in a grid pattern to the substrate

This is a great option for installing membrane in challenging weather and cold conditions where adhesives struggle to perform.

Viking Enviroclad Range:

Enviroclad

  • Six Colour Options: Grey, White, Mansard Brown, Patina Green, Rock Brown, Slate Grey

  • Thickness: 1.14mm and 1.52mm

  • Roll Width: 3.05m (all colours) and 3.66m (grey only)

  • Roll Length: 30.4m

  • Cut-to-length Service: 3.05m wide rolls only

  • CodeMark Certified

  • BRANZ Appraised

  • Water Potability Certified

  • Product Warranty: 20-years

  • Full System Warranty Option: 20-years

  • Installed only by Viking Licensed Applicators

Enviroclad FBS

  • Colour: Grey & White

  • Thickness: 2.5mm (including 1.4mm of fleece backing)

  • Roll Width: 3.66m

  • Roll Length: 30.4m

  • Cut-to-length Service

  • Water Potability Certified

  • Product Warranty: 20-years

  • Full System Warranty Option: 20-years

  • Installed only by Viking Licensed Applicators

Enviroclad APEEL

  • Six Colour Options: Grey, White, Mansard Brown, Patina Green, Rock Brown, Slate Grey

  • Thickness: 1.14mm and 1.52mm

  • Roll Width: 3.05m

  • Roll Length: 30.4m

  • Cut-to-length Service

  • Product Warranty: 20-years

  • Full System Warranty Option: 20-years

  • Installed only by Viking Licensed Applicators

For a list of Viking Enviroclad accessories click here.

For all Viking Enviroclad specification documents, CAD details, product technical statements, CodeMark and BRANZ certificates click here.

Thanks for contacting us. We will be in contact soon to discuss setting up a presentation with you. Rest assured that in working with Viking Roofspec we will assist you in choosing the right roofing or waterproofing solution to protect your (or your customer's) most important assets.

In the meantime feel free to call us on 0800 729 799.

Kind regards

The Team at Viking Roofspec

Book a presentation

Please click once to submit your enquiry – the page will reload once your form is submitted

Thanks for contacting us. We will be in contact soon to discuss your project. Rest assured that in working with Viking Roofspec we will assist you in choosing the right roofing or waterproofing solution to protect your (or your customer's) most important assets.

In the meantime feel free to call us on 0800 729 799.

Kind regards

The Team at Viking Roofspec

{{CC.title}}

Related Products