What is Viking Butylclad?
Viking Butylclad has been keeping New Zealanders dry for almost 50 years. It is the right mix of EDPM and Butyl Rubber to create a membrane that offers elongation and a tough finish.
Viking Butylclad is manufactured in New Zealand.
The product is long and narrow, so there are less seams and wastage. It is available in black & grey; 1.0mm and 1.5mm thicknesses and 1.35 metre wide rolls.
Fit for purpose
Viking Butylclad is ideal for waterproofing smaller low-slope roofs, gutters and parapets.
Flagship projects where Viking Butylclad has been applied include the Fisher & Paykel Healthcare Building in South Auckland; Mainfreight’s 2 depots in Auckland; Novotel Hotel in Greenlane; and the Christchurch Airways Building to name a few.
Viking Butylclad has a 20 year product warranty and is eligible for our comprehensive full system warranty.
Our Full System Warranty is our product and installation warranty in one document.Read More
For detailing weather sealant for rubber membrane installations (black, 300ml) (SES012A).
One-piece sump which comes with an overflow spigot for use in plywood formed box gutters. 20m3 (75mm or 100mm diameter outlet), 27m3 (100mm or 150mm diameter outlet), 60m3 (150mm or 200mm diameter outlet) (IMR100, IMR120, IMR130).
Aluminium mushroom, grey or white (IMV111 & IMV112).
Leaf/Gravel Grate (3)
Accommodates outlet diameters of 75mm to 125mm (IMT304).
Leaf/Gravel Grate (2)
Accommodates pipes from 60mm to 110mm (IMT303).
Leaf/Gravel Grate (1)
Accommodates pipes from 60mm to 200mm (IMT302).
Surefix Drain/Grate Roof Outlet
Drainage outlets with a leaf/gravel grate, flange, membrane clamping ring and anti-back-up flange rings on their pipes. 80mm, 100mm, 150mm diameter pipes (IMT500, IMT501, IMT502).
Fastening Bars/Drip Edges
25mm wide x 2400mm long with an aluminium-ribbed finish for securing any Viking single-ply membrane membrane over an edge whilst simultaneously providing a drip-edge (grey or beige) (SDF110 & SDF115).
Pressure release mechanism for ventilating roof cavity of or moisture vapours. Used for rubber membrane installations only. Not suitable for Dec-K-ing and Bituclad (STP607).
Pre-moulded rubber pipe flashing with a self-adhesive base for detailing penetrations through rubber membranes (black, 25mm - 150mm) (SEM020).
Scupper with fillet for detailing through parapet walls. Opening 70mm x 100mm (IMT106).
Scupper outlet for detailing through wall outlets. Built in fillet and an opening 200mm x 75mm (E2/AS1 compliant) (IMT104).
Conduit installed 150mm above surface as safety outlet for flooding. Opening 200mm x 75mm (IMT105).
Prevents water entering behind cladding where it meets the roof (IMT601 & IMT602).
Self-adhesive, semi-cured detailing tape system used for flashing external detail areas (150mm x 30.4m) (SET153).
Lap Seam Primer
For priming the splicing area of the rubber membrane before applying lap tape (950ml) (SEC034).
Toluene Cleaning Agent
Used to clean membrane materials. Highly toxic - to be used with extreme caution (4L) (MCD030).
Neoprene-based rubber and resin contact adhesive (20L) (SBA000).
Toluene-based liquid used to clean or prime substrates when mixed 50/50 with Butylclad Adhesive or Epiclad Adhesive (20L) (SES225).
Clever product that can be used with either an 80mm or 100mm downpipe. Includes stainless grate and overflow function (SDM049).
Viking Protection Sheet
Polypropylene protection sheet is laid over a new membrane roof or deck installation to protect the membrane throughout construction. It is held in place with a polyethylene tape (3m-wide, cut-to-length) (SRG003A & SPT001).
Pressure sensitive two-sided tape used for fixing down tiles or to splice two sheets of rubber together (76mm x 30.4m) (SMT076V).
75mm or 100mm diameter outlet (IMR400).
150mm diameter pipe (SDM051).
80mm/100mm diameter pipes (SDM050).
Multi Drain/Overflow Side Exit
50mm diameter pipes (SDM053).
Drain/Grill Side Exit
50mm diameter pipe (SDM054).
Aluminium mushroom (black) (IMV113).
Punch n Pour Taps